Table of Contents
Advertisement
CLOCKWISE
HEAD ROTATION
GT SERIES
GRASS/WEED
TRIMMERS
SINGLE OR DOUBLE FEED
NYLON LINE HEAD
ACCORDING TO MODEL
DEBRIS SHIELD
WARNING
DO NOT INSTALL
A METAL BLADE
ON A GT UNIT.
GLOSSARY (CONTINUED)
STRESS CRACK - Structural damage resulting from misfiling of
blade teeth, pinching in a cut or using the blade as a lever.
TIP SPEED - The speed of the cutting line or blade (in mph or fpm)
at the perimeter of the cutting circle.
THROWN OBJECT - A projectile propelled from flexible cutting
line or a blade capable of causing bodily injury to the operator or
bystanders.
6
CURVED
SHAFT
LINE CUT-OFF KNIFE
ON RIGHT SIDE OF
DEBRIS SHIELD
DANGER
CURVED SHAFT
MODELS
D-HANDLE
SWITCH ON
MOST MODELS
STARTER
GRIP
THROTTLE
LEVER
SWITCH IS ON ENGINE
ON SOME MODELS
SHOULDER HARNESS
(STANDARD ON
SOME MODELS)
TRIMMER - A GT or SRM unit when fitted with a line cutting head
or Maxi-Cut Weed Cutter. Metal blades are recommended only on
SRM units with special conversion kits.
UNIT - Powerhead, shaft and cutting assembly.
U-HANDLE - Has the configuration of a bicycle handle bar to reduce
working effort compared to a D-loop handle.
WEED/GRASS BLADE - A blade to cut heavy grass and weeds.
FUEL CAP
ASSEMBLY TOOLS
MUFFLER
COVER
Advertisement
Table of Contents
