Maintenance; Skill Levels; Maintenance Intervals; Lubrication - Echo Rapid Loader 99944200610 Operator's Manual

10
M
AINTENANCE
Your ECHO trimmer is designed to provide many hours of trouble free service. Regular scheduled maintenance will help
your trimmer achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your
unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the
ECHO Dealer do it, each maintenance task has been graded. If the task is not listed see your ECHO dealer for repairs.

SKILL LEVELS

Level 1 = Easy to do. Most required tools come with unit.
Level 2 = Moderate difficulty. Some specialized tools may be required.
Level 3 = Experience required. Specialized tools are required.

MAINTENANCE INTERVALS

Component/System
Drive Shaft
Gear Housing
Screws/Nuts/Bolts

LUBRICATION

Level 1.
Tools Required: 8 mm Open End Wrench, Screwdriver, Clean Rag.
Parts Required: ECHO
Grease.
Gear Housing
1. Clean all loose debris from gear box.
2. Remove plug (A) and check level of grease.
3. Fill gear case with grease.
4. Install plug (A).
Drive Shaft (Lower)
IMPORTANT
Lower and upper drive shaft must be lubricated with ECHO
TM
LUBE grease every 25 hours of operation, otherwise drive shaft
assembly overheating and failure can result.
Maintenance Procedure
Grease
Grease
Inspect/Tighten/Replace
TM
LUBE 8 oz. (P/N 91014) or Lithium Base
®
Skill Level Frequency
1 Every 25 hours of use
1 Every 50 hours of use
1 Before each use
®
A