LG WM2677HSM Owner's Manual page 6

IN%TAll ATI{3N ,,...... ___.v..
INSTRUCTIONS
= Installation clearances
The location must be iarge enough to fully open
the washer door.
,. Washer dimensions
• Most installations require a minimum 4 in,
(10 cm) clearance behind the washer
= Minimum installation spacing for
recessed area installation.
The following dimensions shown are for the minimum
spacing altowed
Additional spacing should be considered for
instaIMtionand servicing
. Additional clearances might be required for wall,
door and floor moldings
• Additional spacing of I in. (2 5 cm) on all sides of
the washer is recommended to reduce noise
transfer
Companion appliance spacing should also be
considered
!i _ i i
(75 6 cm) (10 crn)
[Side Vie'.'.,]
(2 5 cm) (68 Scm) (2 5 cry)
(Front view)
= Level floor
• Allowable slope under entire washer is 1°..
• To minimize noise and vibration, the washer
MUST be Installed on a solidly constructed
floor.
• Carpeting and soft tile surfaces are not
recommended.
• Never install the washer on a platlorm or weakly
supported structure
NOTE: A firm_ solid floor is even (gore critical to a
front*leadlng ,._asher than to a lop-loader.
Iflyour flour is wood and!or ff'ame
construction, you may need to reinforce il,
Front-loaders use substantially faster spin
speeds than top-loaders, causing greater
vibration. If the floor is not solid, yuur washer
will vibrate, You will hear and feel lhe
vibration throughout your house.
- Power outlet
• Must be within 60 in (1 5 m) of either side of the
washer,. Do not overload the outlet with more
than one appliance
• T_me-delay fuse or circuit breaker is recommended
NO]'E: It is the personal t'esponsibility and obligation
of the eu_omer to have a proper outlet
installed by a qualified electrician,
6