Installationinstructions - LG WM2677HSM Owner's Manual

INSTALLATION INSTRUCTIONS
Install or More unit wlnere it x_ill not be exposed to temperatures below freeTJng or
exposed to ontside weather conditions.
Properly ground washer to conform with all governing codes and ordinances.
To reduce the r'isk of electrlc sht_ck, tlt_ not install the washer in humid spaces,
The base opening must not he _tbstructed by carpeting when the washing machine is installed on a carpeted floor:,
In countries where there are areas which may be subject to infeMatlon by cockroaclnes or other vermin, pay
particular attention to keeping the appliance and its surrmnndings in clean c_mdition at all times.
Damage caused by eockr_aches nr other vermin will n_t be covered by the appliance warranty.
,. Shipping bolts
The appliance is fitted with shipping bolts to prevent internal damage during transport
= Removing shipping bolts
1. To prevent internal damage during transport,
4 locking bolts are installed Before operating
the washer, remove the bolts and braces
• f! they are not removed, it may cause severe
vibration, noise, and malfunction.
3. Take out the 4 botts and braces by twisting
the braces slightly Keep the 4 bolts, braces
and lhe wrench for future use
• Whenever the appliance is transported, the
shipping boits and braces must be replaced.
2, Unscrew the 4 bolts with the wrench supplied
4oClose the holes with the caps supplied
5