Using The Audio-In (Microphone) Jack; Using The Audio-Out (Headphone) Jack - HP 2533t - Compaq Mobile Thin Client User Reference Manual

Using the audio-in (microphone) jack

The computer is equipped with a stereo (dual-channel) microphone jack that supports an optional stereo
array or monaural microphone. Using sound recording software with external microphones allows for
stereo recordings.
When connecting a microphone to the microphone jack, use a microphone with a 3.5-mm plug.

Using the audio-out (headphone) jack

WARNING!
earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety and
Environmental Notices. These notices are located in the printed Getting Started guide.
CAUTION:
(monaural) connector into the headphone jack.
In addition to connecting headphones, the headphone jack is used to connect the audio-out function of
an audio device such as external powered speakers or a stereo system.
When connecting a device to the headphone jack, use only a 3.5-mm stereo plug.
When a device is connected to the headphone jack, the speakers are disabled.
To reduce the risk of personal injury, adjust the volume before putting on headphones,
To prevent possible damage to an external device, do not plug a single sound channel
Using multimedia hardware 37