HP AA979A - StorageWorks SAN Switch 2/8V User Manual page 68

Zoning Telnet Commands
Specify a World Wide Name as eight hexadecimal characters separated by colons,
for example, 10:00:00:60:69:00:00:8a. Zoning has no knowledge of the fields
within a World Wide Name; the eight bytes are simply compared with the node
and port names presented by a device in a login frame (FLOGI or PLOGI). When
a zone member is specified by node name, then all ports on that device are in the
zone. When a zone member is specified by port name, then only that single device
port is in the zone.
Specify a QuickLoop AL_PA as a QuickLoop name followed by a list of AL_PAs;
for example, qloop1[01,02]. QuickLoop names have the same format as zone
names and are created with the qloopCreate command to define a switch or
pair of switches that form the QuickLoop.
Specify a zone alias name using the same format as a zone name; it is created with
the aliCreate command. The alias must resolve to a list of one or more of the
following:
The types of zone members used to define a zone may be mixed. For example, a
zone defined with the following members: "2,12; 2,14; 10:00:00:60:69:00:00:8a"
would contain all devices connected to switch 2, ports 12 and 14, and to the device
with the World Wide Name 10:00:00:60:69:00:00:8a (either node name or port
name), at the port in the fabric to which it is connected.
Operands
The following operands are required:
zoneName
zoneMemberList
68
Physical fabric port numbers
World Wide Names
QuickLoop AL_PAs
Name for a zone to be created, in quotes. This name cannot
be used for any other zone object.
List of members to be included in the zone, in quotes,
separated by semicolons. Can be one or more of the
following:
– Physical fabric port numbers
– World Wide Names
– QuickLoop AL_PAs
– Zone alias names
HP StorageWorks Zoning Version 2.6.1 User Guide