HP AA979A - StorageWorks SAN Switch 2/8V User Manual page 62

Zoning Telnet Commands
Description
A QuickLoop name is a C-style name beginning with a letter and followed by any
number of letters, numerals, and underscores. Names are case sensitive; for
example, Qloop_1 indicates a different QuickLoop than qloop_1. Blank spaces
are ignored.
The QuickLoop member list must have one or two members; an empty list is not
allowed.
When a configuration is enabled, all QuickLoops defined in the configuration
must resolve to a maximum of two switch World Wide Names.
Operands
The following operands are required:
qloopName
qloopMemberList
Example
Create two QuickLoops, one single switch and one dual switch:
sw5:admin> qloopCreate "qlp1", "10:00:00:60:69:00:60:11"
sw5:admin> qloopCreate "qlp2", "wwn2; wwn3"
See Also
qloopAdd
qloopDelete
qloopRemove
qloopShow
62
Name of QuickLoop to be created, in quotes. The same
name cannot be used for another zone object.
List of members to be added to the QuickLoop, in quotes,
separated by semicolons. Can be one or more of the
following:
– World Wide Names
– Zone alias names
HP StorageWorks Zoning Version 2.6.1 User Guide