HP AA979A - StorageWorks SAN Switch 2/8V User Manual page 36

Zoning Sample Configurations
<Create aliases for switch 1 and switch 2 using switch WWNs>
switch1:admin> aliCreate "switch1_WWN" "10:00:00:60:69:10:1c:19"
switch1:admin> aliCreate "switch2_WWN" "10:00:00:60:69:10:1b:a9"
<Create a dual-switch QuickLoop>
switch1:admin> qLoopCreate "qloop1", "switch1_WWN; switch2_WWN"
Note: The above steps are equivalent to the following:
On switch 1...
<Set QuickLoop partner and enable QuickLoop switch 1>
switch1:admin> q1Partner "10:00:00:60:69:10:1b:9a"
Setting Quick Loop to dual-switch mode,
Committing configuration...done.
switch1:admin> q1Enable
Setting switch to Quick Loop mode,
Committing configuration...done.
Initialize Quick Loop...
switch1:admin>
---------------------------------------------------------------------------
On switch 2
<Set QuickLoop partner and enable QuickLoop ports on switch 2>
switch2:admin> q1Partner "10:00:00:60:69:10:1c:19"
Setting Quick Loop to dual-switch mode,
Committing configuration...done.
switch2:admin> q1Enable
Setting switch to Quick Loop mode,
Committing configuration...done.
Initialize Quick Loop...
switch2:admin>
<Create aliases for QuickLoop devices>
switch1:admin> aliCreate "Private_ServerA", "1,3"
switch1:admin> aliCreate "Private_ServerB", "1,4"
switch1:admin> aliCreate "Private_ServerC", "1,5"
switch1:admin> aliCreate "Private_StorageA", "2,2"
switch1:admin> aliCreate "Private_StorageB", "2,3"
switch1:admin> aliCreate "Private_storageC", "2,4"
36 HP StorageWorks Zoning Version 2.6.1 User Guide