Cfgshow - HP AA979A - StorageWorks SAN Switch 2/8V User Manual

Example
Enable a zone configuration and then save it:
sw5:admin> cfgEnable "USA_cfg"
zone config "USA_cfg" is in effect
sw5:admin> cfgSave
Updating flash...
See Also
cfgClear
cfgDisable
cfgEnable

cfgShow

cfgShow
Function
Display zone configuration information.
Synopsis
cfgShow [pattern]
Availability
All users
Description
If no parameters are specified, all zone configuration information (both defined
and enabled) is displayed.
If a parameter is specified, it is used as a pattern to match zone configuration
names with the zone configurations that are in the defined configuration; those
that match the pattern are displayed.
The defined configuration is the complete set of all zone objects that have been
defined in the fabric. There may be multiple zone configurations defined, but only
one can be enabled at a time. There may be inconsistencies in the definitions,
zones, or aliases that are referenced but not defined, or there may be duplicate
members.
HP StorageWorks Zoning Version 2.6.1 User Guide
cfgShow
55