Igmp Filter Definition; Igmp Filtering Port Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Reference Manual

IGMP filter definition

The following table describes the IGMP Filter Definition commands.
IGMP Filter Definition commands
Table 143
Command
ip igmp profile <1-16> range <IP
multicast address> <IP multicast
address>
ip igmp profile <1-16> action
{allow|deny}
ip igmp profile <1-16> enable
no ip igmp profile <1-16> enable
no ip igmp profile <1-16>
show ip igmp profile <1-16>

IGMP filtering port configuration

The following table describes the IGMP Port Filtering Configuration commands.
IGMP Filtering Port commands
Table 144
Command
[no] ip igmp filtering
ip igmp profile <1-16>
no ip igmp profile <1-16>
show interface port {<port number>}
igmp-filtering
Description
Configures the range of IP multicast addresses for this filter.
Enter the first IP multicast address of the ranger, followed by the
second IP multicast address of the range.
Command mode: Global configuration
Allows or denies multicast traffic for the IP multicast addresses
specified.
Command mode: Global configuration
Enables this IGMP filter.
Command mode: Global configuration
Disables this IGMP filter.
Command mode: Global configuration
Deletes this filter's parameter definitions.
Command mode: Global configuration
Displays the current IGMP filter.
Command mode: All except User EXEC
Description
Enables or disables IGMP Filtering on this port.
Command mode: Interface port
Adds an IGMP filter to this port.
Command mode: Interface port
Removes an IGMP filter from this port.
Command mode: Interface port
Displays the current IGMP filter parameters for this port.
Command mode: All except User EXEC
Configuration Commands
161