Using A Print Server At A Dial-Up Destination (Remote) - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual

Using a print server at a dial-up destination (remote)

When the power is turned on
The computer dials out because access is made to a local file
server first and then to a primary server. There is no problem
since this occurs only once at power on.
When the Ethernet card is not set up correctly
The computer dials out because access is made to a local file
server first and then to a primary server. It dials out repeatedly
at intervals of approximately 5 minutes. Use the correct Ethernet
card settings to avoid this phenomenon.
During normal operation (standby)
An SPX Watchdog packet is sent according to the NetWare
protocol convention. Use a router with a vicarious response
function to avoid dialing out unintentionally.
During normal operation (printing)
The computer dials out while the print data is being transferred.
When the primary server is down during printer operation
The computer dials out because connection to the primary server
is attempted periodically. Since this is attributable to the
automatic re-connection function, turn off the printer until the
primary server is restored.
Using the Ethernet Card with NetWare 4-39