Using Epson Net!2 To Create Queues - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual

Select Bindery Print Server or Bindery Remote Printer
when you are using Bindery mode in NetWare 3.x or
NetWare 4.1 or later.
When you select NDS Print Server or NDS Remote Printer
for the Mode, enter the NDS Tree name (up to 31
characters) and the NDS Context (up to 255 characters).
When you select NDS Print Server or Bindery Print Server
for the Mode, make the Print Server settings.
6. Type the Primary File Server name (up to 47 characters), Print
Server name (up to 47 characters), Polling Interval (from 5 to 90
seconds), and the NetWare Password (up to 19 characters).
7. When you select NDS Remote Printer or Bindery Remote
Printer for Mode, make the Remote Printer settings.
8. Type the Primary Print Server name (up to 47 characters) and
Printer Port Number (from 0 to 254).
9. Click the SUBMIT button to update the settings. If you set up a
password, type the password when you are prompted.
10. If the message "Configuration change is complete!" appears on
your screen, configuration is complete. Activate the changes by
clicking RESET or turning your printer off and on.

Using EPSON Net!2 to Create Queues

If you are using the bindery context, you can create a print queue and
set up the queue information on the NetWare file server with EPSON
Net!2 for Windows. Follow these steps:
1. From any NetWare client, log in to the file server you want to
set up with supervisor privileges.
2. Run EPSON Net!2 from the Start menu.
3. Select Queue Settings from the Option menu.
Using the Ethernet Card with NetWare 4-37