Setting Up For Hp-Ux 9.05 Or Later - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
Setting up for HP-UX 9.05 or later
In the following steps, substitute the name you will use to configure
your printer's Ethernet card on the network for HOSTNAME.
Substitute the printer name that users will send print jobs to for
Rprinter.
1.
Add the IP address and host name to the /etc/hosts file.
For example:
22.33.44.55 HOSTNAME
2.
Terminate the printer service.
For example:
lpshut
3.
Create the printer.
For example:
lpadmin -pRPrinter -v/dev/null -mrmodel
-ormHOSTNAME -orpaux
4.
Restart the print service.
For example:
lpshed
5.
Enable the printer for use.
For example:
accept Rprinter
enable Rprinter
Use the lp command to print.
For example:
lp -DRPrinter Print-File-Name
Using the Ethernet Card with UNIX 9-5
Advertisement
Table of Contents
