Operator Overview - Chamberlain MEGA SLIDE-X Owner's Manual

OPERATOR OVERVIEW

The LiftMaster model MEGA SLIDE X slide gate operator is unique in the industry. Setting the MEGA SLIDE X apart are many features
that make it the front runner in its class. With standard features like:
• Built in battery run - inherent 24 Vdc backup power with regulated 24 Vdc for accessories.
• High torque 1/2 HP 24 volt Permanent Magnet DC motor.
• Full service controller with eight inputs and LED indicators for loops, card reader, radio, etc.
• Continuous duty operation for most types of gates.
• Reversible gate direction for right or left handed operation.
• Instant Reverse Device (IRD) monitor senses obstructions going open and close.
• Automatic open of gate when ac power is lost if desired (with 15 second delay selection).
• ANTI-TAIL GATE with QUICK CLOSE feature STOP gate in close travel if tail-gating is sensed.
• Upon complete system failure (lightning, surges, etc.) gate can be pushed open by hand.
• All rust proof aluminum construction with baked on powder coat enamel.
• Molded Polyethylene UV stabilized cover never needs wax or paint.
• Direct drive gear reducer eliminates many parts that might otherwise fail.
• State of the art MOSFET motor drive technology, NO contactors or relays.
• Dynamic motor braking to preserve gate stopping points.
• Soft start and stop in open and close travel motions.
• High reliability micro switches actuate through nylon limit nuts on a precision ground shaft.
• Maximum Run Timer for motor (MRT) with anti-tamper protection in closing direction.
• Each unit configurable as master or second operator.
• Safe 24 Vdc low voltage motor and control wiring.
• LED diagnostics for easy trouble shooting.
• Closing timer adjustable from 1-31 seconds with on/off selection.
• Transient voltage protection on all inputs.
• Capable of being powered from 120 or 230 Vac, or UL Listed Class 2 Solar Power.
• On 120 Vac installations, unswitched duplex outlet gives convenient supply for 120 Vac accessories.
• Maximum weight of 1000 lbs. Maximum length of 30'. (Free moving operation)
• 10 year perforation warranty on cover and chassis with 2 years on electronics and mechanism.
• Input for safety edge device to reduce the possibility of entrapment – recommended.
• Input for non-contact sensing device (photo beam) for secondary entrapment protection.
• UL Listed device. (Standards by UL are UL-325, UL-991)
8