Customizing Your Software Settings
The WD SmartWare software makes it easy for you to quickly customize its own
software settings for the best possible performance with your drive by:
• Specifying the number of backup versions that you want to keep for each file
• Inhibiting backups until times when your computer is idle
• Specifying a unique folder on your computer to store files retrieved from your
drive
• Automatically:
-
Displaying the WD SmartWare Home screen whenever you connect your drive
to your computer
-
Checking for WD SmartWare software updates
To customize your WD SmartWare software settings for the best possible performance
with your drive, on the Software Settings screen (see Figure 7 on page 22):
IF you want to . . .
Change the number of backup
versions to keep for each file,
Enable anytime backups or inhibit
them until your computer is idle,
Specify a path to a different retrieve
folder,
Change the options that whenever
you reconnect your WD SmartWare
drive to your computer:
• Display the WD SmartWare Home
screen
• Check for software updates
Specifying a Different Retrieve Folder
When you start a retrieve, you can choose whether you want to store the retrieved files in
either:
• Their original locations on your computer
• A Retrieved Content folder
By default, the WD SmartWare software creates and uses a Retrieved Content subfolder
in your MYDESKTOP folder. To specify a different folder:
1. Either create a new folder or determine which existing folder you want to use.
2. On the Software Settings screen (see Figure 7 on page 22), click Retrieve Folder to
display the Set Retrieve Folder dialog:
THEN click . . .
AND see . . .
Set File History
"Specifying the Number of
Backup Versions" on page 23.
Backup Speed
"Pausing Backups Until Your
Computer is Idle" on page 23.
Retrieve Folder
"Specifying a Different Retrieve
Folder" on page 39.
Preferences
"Setting the Preferences
Options" on page 40.
MANAGING AND CUSTOMIZING YOUR DRIVE – 39
MY PASSPORT STUDIO
USER MANUAL