Showing The Wd Smartware Virtual Cd - Western Digital WDBAAC2500ACH - My Passport Elite User Manual

6. Select your My Passport drive, and the WD SmartWare Virtual CD Manager utility
displays its current and target VCD settings:
7. Click Configure Drive to continue and, as prompted, for your change to take effect,
you must power cycle your My Passport drive:
a. Disconnect the USB micro cable or FireWire cable from your drive.
b. Wait ten seconds.
c. Reconnect the USB micro cable or FireWire cable to your drive.
8. Click Exit to close the WD SmartWare Virtual CD Manager utility and check your
desktop display to confirm the change.
9. If you think you might later want to move your My Passport drive to another
computer, show (enable) the VCD there, or install the WD SmartWare software, then
use the copy/paste or drag/drop function to copy the Virtual CD Manager folder from
your desktop to your My Passport drive.

Showing the WD SmartWare Virtual CD

If you got started without installing the WD SmartWare software, hid (disabled) the
WD SmartWare virtual CD (VCD), and now want to move your My Passport drive to
another computer, or install the WD SmartWare software, you might want or need to
show (enable) the VCD on the other computer. Doing this would be a simple two-click
operation from the WD SmartWare Virtual CD Settings dialog (see "Showing or Hiding
the Virtual CD Icon" on page 44). But if you have not installed the WD SmartWare
software and have hidden the VCD, it is more involved.
If you have not installed the WD SmartWare software and want to show the VCD:
1.
Use the copy/paste or drag/drop function to copy the Virtual CD Manager file from
your My Passport drive to the desktop of your computer. (This is the file that you
copied to your My Passport drive at step 9 of "Hiding the WD SmartWare Virtual CD"
in the prior section.)
If you did not copy the Virtual CD Manager folder to your My Passport drive when
you hid the VCD, then use your Internet connection to download the utility Virtual CD
(VCD) Manager for Mac from support.wdc.com.
CONNECTING THE DRIVE AND GETTING STARTED – 14
MY PASSPORT STUDIO
USER MANUAL