Discovering Devices - NETGEAR GS108Tv2 - ProSafe Gigabit Smart Switch Coming Soon User Manual

Discovering Devices

When launched, the utility immediately searches the network for network devices.
Note: Local PC firewall applications such as Symantec Endpoint
Protection can prevent the utility from communicating with the
switches. If the utility is unable to discover your switches and you are
using a local firewall, you will need to turn off the firewall function in
order for discovery to work.
Within a few seconds the utility discovers and lists all devices in your network or in the same
broadcast domain. Discovery will continue through the network until blocked by a router or
firewall.
The discovered devices are displayed as shown below. You can now select a device to
configure or display its status.
8 | Chapter 1. Getting Started
ProSafe Smart Control Center User Guide