Smart Control Center Installation - NETGEAR GS108Tv2 - ProSafe Gigabit Smart Switch Coming Soon User Manual

Smart Control Center Installation

For easy device management, install and use the ProSafe® Smart Control Center Utility.
The utility is on the Resource CD shipped with Smart Control Center switches.
Note: The utility is only supported on Microsoft Windows and can be
installed on any Windows PC(s) on the network containing the
switches to be managed.
If an earlier version of the utility already exists on the PC, the newer version replaces the
older version. Newer versions of the utility are backwards-compatible, and support all
previously released Smart switches. If the version of the utility you are trying to install is older
than the one already installed on the PC, the installation will not be performed.
To install the utility:
1. Insert the Resource CD that came with your switch into the PC that you will use to
manage your switches. The Resource CD home page displays.
Resource CD pages, and the installation guide for the switch can be displayed in several
languages. Use the pull-down menu in the upper right corner of the Resource CD home
screen to select the desired language.
The utility uses the network programs Adobe AIR to process network commands. If not
already installed on your PC, Adobe AIR will also be installed, and placed in your program
directory.
2. Click the Install NETGEAR ProSafe Smart Control Center Utility link to install the
program on your PC.
Note: The utility name may vary slightly between different Smart Control
Center switch models.
6 | Chapter 1. Getting Started
ProSafe Smart Control Center User Guide