NETGEAR
Version: 10.1.1, build 10 Release Notes Issued on: 09/29/2003
Product Description
The NETGEAR ProSafe VPN Client is a virtual private network (VPN) client for
remote access and secure communications.
New Features and Enhancements
•
Smart card removal clears keys option
•
Phoenix Device-Connection Authentication support
•
WAN maximum transmission unit (MTU) adjust settings for Windows 2000
and XP to better integrate running the client over DSL lines using Point-to-Point
Protocol over Ethernet (PPPoE)
.
Component Versions
Component
CSP Library (FIPS)
CSP Library (Non-FIPS)
Deterministic Networks (DNE) shim
Layer 2 Tunneling Protocol (L2TP)
Security Policy Editor
Certificate Manager
Phoenix Device-Connection Authentication CryptoOSD
Before Installing or Upgrading to This Version
When upgrading from an earlier version of the VPN client, take these required steps
before installing the client:
1.
Uninstall the existing version through the Control Panel Add/Remove
Programs application.
2.
Reboot your computer.
Note: The original Windows installation files may be required during installation,
depending on the specific version of Windows and your configuration. Make sure that
you have the CD-ROMs or files available before you start the installation.
™
ProSafe VPN Client
Release Notes
Version
3.1.0b22
3.0.1b22
2.20
4.29
1.2.1 B10
1.2.1 B10
1.2.3.2
Release Notes