Zooming; Locating Desired Scene - Toshiba MD14H63 Owner's Manual

®
omm oca#ng desired scene
.... DISPLAY
0-9
JUMP
ZOOM
CANCEL
ENTER
f _ Zooming" / _ Locating desired scene
This unit will allow you to zoom in on the frame image.You
can then make selections by switching the position of the
frame.
Press ZOOM during playback.
,22g _ The center part of the image will be
O zoomed in.
Each press of ZOOM will change the
ZOOM O.1 (x 1.3), 0,2 (x 1.5) and 0`
3 (x 2.0).
Press A/v/_/_ to view a different part of the
frame.
You may move the frame from the
center position to UP, DOWN, LEFT
or RIGHT direction.
in the zoom mode, press ZOOM repeatedly to return to a 1:1 view (0` Off).
INPUT
ZOOM
O
Notes:
• You can select the Pause or SIow in the zoom mode.
• Some discs may not respond to zoom feature.
Use the title, chapter and time recorded on the DVD disc to
locate the desired point to playback. In the case of VCD/Audio
CD discs, time and track are used to locate the desired point
to playback.
To check the title, chapter/track and time, press DISPLAY.
Press JUMP during playback or stop mode.
Jump
CD
• "Time" works only in DVD playback
or DVD resume mode.
Press _ or _ to select the "[_ Time", "[_ Title/
Track" or 'I_ Chapter".
Press Number buttons (0-9) to input the
number.
CD GD CD
(31)(!)(i)
CD_CD
• If you input a wrong number, press
CANCEL.
• Refer to the package supplied with
the disc to check the numbers.
Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
'_ _ above operation.
Notes:
In case of the Audio CD and Video-CD, only Track and Time
can be selected.
• In case of the Video-CD playback with PBC, the JUMP does
not work. See "To turn off the PBC"_.
®
38
I 5Y80 01A p3834imdd 38
÷
12,21'2006 9:45:35 AM