Zooming; Changing Angles; Locating Desired Scene - Toshiba VTD1552 User Manual

ZOOMING/CHANGING ANGLES/LOCATING DESIRED SCENE
NOTES:
• Depending on the DVD, you may not be
able to change the angles even if multi-
angles are recorded on the DVD.
• You can select the Pause, Slow or Search
playback in the zoom mode.
• Some discs may not respond to zoom fea-
ture.
28
5Q40401A P26-31

Zooming

This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
1
2
3

Changing Angles

When playing back a disc recorded with multi-angle facil-
ity, you can change the view angle.
1
2
1
2
3
4
28
Press ZOOM during play-
back.
The centre part of the
image will be zoomed in.
Each press of ZOOM will change the ZOOM
(Min.), 2 (Medium) and
Press / or / to view a different part of the frame.
You may move the frame from the centre position to UP,
DOWN, LEFT or RIGHT direction.
In the zoom mode press ZOOM repeatedly to return to a
1:1 view ( Off).
Press ANGLE during play-
back.
The current angle will ap-
pear.
Press ANGLE repeatedly until the desired angle is selected.

Locating Desired Scene

Use the title, chapter and time recorded on the disc to
locate the desired point to play back.
Press JUMP during play-
back.
Press or to select the "Time", "Title" or "Chapter".
Press Number buttons (0–9) to input the number.
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to check the
numbers.
Press ENTER.
• Playback starts.
• When you change the title, playback starts from
Chapter 1 of the selected title.
• Some discs may not work in the above operation.
3/25/05, 10:45 AM
1
1
3 (Max.).
1/9
Jump Time
Title
Chapter
/Enter/0 9/Cancel/Jump