Installing An Ac Power Supply In A J-Ex8200 Switch - Dell PowerConnect J-EX8208 Hardware Manual

Dell PowerConnect J-Series J-EX8208 Ethernet Switch Hardware Guide
Related
Documentation

Installing an AC Power Supply in a J-EX8200 Switch

114
The AC power supplies, fan tray, SFP transceiver, and SFP+ transceiver in J-EX8200
switches are hot-removable and hot-insertable FRUs: you can remove and replace them
without powering off the switch or disrupting switch functions.
To install an SRE module in a J-EX8208 switch, follow instructions in "Installing an SRE
Module in a J-EX8208 Switch" on page 118. To remove an SRE module, follow instructions
in "Removing an SRE Module from a J-EX8208 Switch" on page 167.
To install an SF module in a J-EX8208 switch, follow instructions in "Installing an SF
Module in a J-EX8208 Switch" on page 120. To remove an SF module, follow instructions
in "Removing an SF Module from a J-EX8208 Switch" on page 169.
To install a line card in a J-EX8208 switch, follow instructions in "Installing a Line Card
in a J-EX8200 Switch" on page 122. To remove a line card, follow instructions in "Removing
a Line Card from a J-EX8200 Switch" on page 170.
To install an AC power supply in a J-EX8208 switch, follow instructions in "Installing an
AC Power Supply in a J-EX8200 Switch" on page 114. To remove a power supply, follow
instructions in "Removing an AC Power Supply from a J-EX8200 Switch" on page 161.
To install a fan tray in a J-EX8208 switch, follow instructions in "Installing a Fan Tray in
a J-EX8208 Switch" on page 116. To remove a fan tray, follow instructions in "Removing
a Fan Tray from a J-EX8208 Switch" on page 163.
To install a transceiver in a J-EX8208 switch, follow instructions in "Installing a Transceiver
in a J-EX Series Switch" on page 125. To remove a transceiver, follow instructions in
"Removing a Transceiver from a J-EX Series Switch" on page 173.
Field-Replaceable Units in a J-EX8208 Switch on page 21
J-EX8208 Switch Hardware Overview on page 3
The AC power supply in a J-EX8200 switch is a hot-insertable and hot-removable
field-replaceable unit (FRU). Up to six AC power supplies can be installed in a J-EX8200
switch. All AC power supplies install in the front of the chassis in the slots provided at
the bottom. See "Slot Numbering for a J-EX8208 Switch" on page 11.
Before you install an AC power supply in the switch:
Ensure you understand how to prevent ESD damage. See "Prevention of Electrostatic
Discharge Damage on J-EX Series Switches" on page 236.
Ensure that you have the following parts and tools available to install an AC power supply
in a J-EX8200 switch chassis:
Electrostatic discharge (ESD) grounding strap
Phillips (+) screwdriver, number 1