Using The Remote Control Unit (Optional) - Pentax 18263 - OptioS Digital Camera Operating Manual

Using the Remote Control Unit (optional)

You can take pictures using the remote control F (optional).
z
x
Playing Back Images
• The buttons on the camera can be used in the same way.
memo
• Please ensure that the remote control unit is no more than 4
meters away from the front of the camera.
• To take a picture immediately after pressing the shutter release
button on the remote control unit, press the four-way controller
in step z to display
• You can use the remote control E (optional) to operate the
zoom.
b
Life of the Battery for the Remote Control Unit
A signal can be sent from the remote control unit to the camera
approximately 30,000 times. If the battery needs changing, con-
tact your nearest Pentax customer service center. (A charge is
made for changing the battery.)
70
Press the four-way controller ( ) in
Capture mode to display (
the LCD monitor.
The self-timer lamp will blink and the
camera is ready to take pictures.
Press the shutter release button on
the remote control unit.
The self-timer lamp will blink rapidly and the picture will be
taken after approximately three seconds.
z
) on
p.79
on the LCD monitor.
198 198
10/20/2003 10/20/2003
11:19 11:19