Display Assembly - Compaq Presario 3000 - Desktop PC Maintenance And Service Manual

Removal and Replacement Procedures

5.12 Display Assembly

16.0-inch, XGA, TFT (for use only with models with
config. codes LS51, LS52, and LS56)
13.3-inch, XGA, TFT (for use only with models with
config. codes LS53, LS54, LS55, and LS57)
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the LED switch cover (Section 5.7).
3. Disconnect the display cable 1 from the system board
(Figure 5-20).
4. Route the display cable out of the retention clip 2 in the top
cover.
Figure 5-20. Disconnecting the Display Cable
5–24
Display Assembly
Spare Part Number Information
Maintenance and Service Guide
310652-001
310651-001