b. Slide the battery pack lock latches
c. Slide and hold the battery pack release latch
d. Use the notch
e. Remove the battery pack.
Figure 5-2. Removing the Battery Pack
Reverse the preceding procedure to install the battery pack.
4. Remove the battery bay space saver by following these steps:
For use only with Compaq 800 models
a. Turn the notebook bottom side up with the rear panel
Maintenance and Service Guide
(Figure 5-2).
right.
edge of the battery pack up and back
Battery Bay Space Saver
Spare Part Number Information
facing you.
Removal and Replacement Procedures
3
in the battery pack to swing the front
to the right
1
2
to the
4
.
313579-001
5–5