Connection To Your Pc - Olympus DR 2000 - Speaker Microphone - Monaural Instructions Manual

Connection to Your PC

Be sure to install the DSS Player software before connecting the Directrec to the
PC. However, if you do connect the Directrec before or during the software instal-
lation, the "Add New Hardware Wizard" will appear. In this case, cancel the wizard
by pressing the [Cancel] button in the wizard screen and then install or continue
the installation of DSS Player software.
Connecting to Your PC Using the USB Cable
Disconnecting from Your PC
1
Disconnect the Directrec USB cable from your PC USB port or
USB hub.
......................................................................................................................................
Notes
• Some PCs and USB hubs may not supply sufficient power and the Directrec fails to
connect. Refer to your PC User's Manual regarding the USB port or USB hub on your PC.
• When using a USB hub to connect the Directrec, always use a self-powered (AC adapter)
USB hub.
• Never disconnect the USB cable while the record/play indicator light is flashing. If you do,
the data will be destroyed.
1
Connect the Directrec USB cable
directly into the USB port or USB hub
of your PC.
When the DSS Player is activated, the
icon will appear in Device Tree View (
in the Dictation Module.
P.11)
9