HP dx2700 - Microtower PC Service & Reference Manual page 42

4. To remove the front bezel, gently pull up all three tabs 1 on the top of the bezel, then pull the
bezel 2 away from the chassis.
Removing the Front Bezel
To reassemble the computer, reverse the above procedure.
✎
Press down while replacing the access panel. Refer to the label on the inside of the access panel
for more information.
✎
To re-install the front bezel, insert the two bezel bottom tabs, then rotate the front bezel forward
to snap the three tabs on the top of the bezel in place.
Service Reference Guide
Removal and Replacement Procedures— Microtower (MT)/Small Form Factor (SFF) Chassis
431672-001 6–5