Installing The Raid Driver (For Bootable Raid Array) - MSI 790FX GD70 - Motherboard - ATX User Manual

M S-7577 M ainboard

Installing the RAID Driver (for bootable RAID Array)

1. After you complete the RAID BIOS setup, boot from the W indows CD, and the
W indows XP Setup program starts.
2. Press F6 and wait for the W indows Setup screen to appear.
Insert the floppy that contains the RAID driver, press the "S" key to select "Specify
3.
Additional Device".
Note: for Windows Vista, you can copy the SATA driver to a medium (floppy/
CD/ DVD or USB)
Important
Please follow the instruction below to make a SATA RAID driver for yourself.
1. Insert the MSI DVD into the DVD-ROM drive.
2. Click the "Browse CD" on the Setup screen.
3. Copy all the contents in the :
* for Windows XP:
\\ChipSet\AMD\XP\SBDrv\RAID7xx
* for Windows Vista:
\\ChipSet\AMD\VISTA\Packages\Drivers\SBDrv\SB7xx\RAID\ x86 (for
32bit) or x64(for 64bit)
4. The driver disk for RAID controller is done.
4. W hen prompted, insert the floppy disk and press Enter.
For W indows Vista:
During the operating system installation, after selecting the location to install
W indows Vista, please click on the "Load Driver" button to load RAID driver.
5. You should be shown a list of available SCSI Adapters.
6. Select the compatible RAID controller for 32-bit/ 64-bit version system and then
press ENTER.
7. The next screen should confirm that you have selected the RAID controller.
Press ENTER again to continue.
8. You have successfully installed the RAID driver, and W indows setup should
continue.
9. Leave the disk in the floppy drive until the system reboots itself. W indows setup
will need to copy the files from the floppy again after the RAID volume is formatted,
and W indows setup starts copying files.
C-8