Installing The Raid Driver (For Bootable Raid Array - MSI K9N4 SLI Series User Manual

Installing the RAID Driver (for bootable RAID Array)

1. After you complete the RAID BIOS setup, boot from the W indows CD, and the
W indows Setup program starts.
2. Press F6 and wait for the W indows Setup screen to appear.
3. Specify the NVIDIA drivers:
(1) Insert the floppy that has the RAID driver, press S, then press Enter. The
W indows Setup screen appears as below:
Important
Please follow the instruction below to make an nVIDIA Serial ATA RAID driver
for yourself.
1. Insert the MSI CD into the CD-ROM drive.
2. Click the "Browse CD" on the Setup screen.
3. Copy all the contents in the :\\nVidia \System \CK804 \IDE \Win XP or
Win2K \SATARAID to a formatted floppy disk.
4. The driver disk for nVIDIA RAID controller is done.
(2) Select "NVIDIA RAID CLASS DRIVER" and then press Enter.
(3) Press S again at the Specify Devices screen, then press Enter.
(4) Select "NVIDIA NForce Storage Controller" and then press Enter. The follow-
ing W indows Setup screen appears listing both drivers:
nVidia RAID
C-7