MSI 790FX GD70 - Motherboard - ATX User Manual page 62

Adjust CPU FSB Frequency (M Hz)
This item allows you to adjust the CPU FSB frequency.
Adjust CPU Ratio
This item is used to adjust CPU clock multiplier (ratio). It is available only when the
processor supports this function.
Adjust CPU-NB Ratio
This item is used to adjust CPU-NB ratio.
Adjusted CPU Frequency (M Hz)
It shows the adjusted CPU frequency (FSB x Ratio). Read-only.
Advanced Clock Calibration
This item is for overclock. Setting to [Enabled] allows you to set the CPU Ratio higher.
It is available only when the processor supports this function.
Auto OverClock Technology
Setting this item to [Max FSB] allows the system to detect the maximum FSB clock and
to overclock automatically. If overclocking fails to run, you can try the lower FSB
clock for overclocking successfully.
M ultiStep OC Booster
This item is used to avoid the BIOS might crash with overclocking.
Disabled
Mode 1
Mode 2
OC Dial Function
This item allows you to enable/disable the OC Dial function. Setting to [Enable] activates
the following fields, and use the following fields to set each OC Dial function.
OC Dial Step
This item is used to set value of each step when you rotate the OC dial knob.
OC Dial Reset
Select [Reset] if you need to reset the OC Dial Value.
OC Dial Value
This item indicates the overclocking value by OC dial function. W hen you rotate the
OC dial knob, this value will change.
OC Dial Adjusted Base Clock (MHz)
It shows the adjusted FSB clock by OC Dial function (FSB Clock +OC Dial Value).
Read-only.
Disable this item, apply OC settings during POST.
Slight OC during POST and then apply full OC when loading
the OS
Load the OS then apply the OC settings.
BIOS Setup
3-21