Preparing The Rack For Server Installation; Measuring With The Rack Template - HP DL760 - ProLiant - 1 GB RAM User Manual

IMPORTANT: Refer to the following rack documentation for further cautions:
•
9000 Rack Series Products Audio-Visual (AV) CD Kit (shipped with HP racks)
•
Rack Builder Pro Configuration Tool CD (available on the HP website or ordered with the
Rack Resource CD Kit)
•
Rack Products Documentation CD (available on the HP website or ordered with the Rack
Resource CD Kit)
•
Rack 7000/4000 Series Rack Resource CD Kit (shipped with all Compaq 7000 and 4000
Series Racks)

Preparing the Rack for Server Installation

To prepare the rack for a server installation:
•
Measure with the rack template and install cage nuts
•
Install the slide bracket assemblies

Measuring with the Rack Template

The rack template provides an easy and reliable way to properly position the rack rail
assemblies in the rack.
•
The template is two-sided and is printed with arrows that show you where to
insert rack rail assemblies on the front and back of the rack.
•
Use a pencil to mark the top and bottom edges of the template against the rack
supports, identifying where the server fits and providing a starting point for
installing the next unit.
WARNING: Always mount the heaviest item on the bottom of the rack and
work from the bottom to the top.
HP ProLiant DL760 Generation 2 Server User Guide
Installing the Server in a Rack
2-17