Computer Setup-Boot; Computer Setup-Exit - Compaq dx1000 - Microtower PC Service & Reference Manual

Computer Setup—Boot
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-4 Computer Setup—Boot
Option
Boot-time Diagnostic
Screen
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Floppy Group Boot
Priority
CD-ROM Group Boot
Priority
Hard Drive Group Boot
Priority
Network Group Boot
Priority
ESC:Boot Menu
F9:Diagnostics
F10:Setup
F11:Recovery
F12:Boot from LAN
Computer Setup—Exit
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-5 Computer Setup—Exit
Option
Exit Saving Changes
Exit Discarding
Changes
Load Setup Defaults
Description
Disables/enables POST diagnostic messages display.
Allows you to specify which device groups will boot first, second, third, and fourth or to disable any
of the four:
● Floppy Group
●
CD-ROM Group
● Hard Drive Group
●
Network Boot Group
NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating
system has started.
Specifies boot device priority within removable devices.
Specifies boot device priority within CD/DVD drives.
Specifies boot device priority within hard drives.
Specifies boot device priority within bootable network devices.
Disables/enables the Esc key boot menu during POST.
Disables/enables the F9 key diagnostics function during POST.
Disables/enables the F10 key computer setup function during POST.
Disables/enables the F11 key system recovery function during POST.
Disables/enables the F12 key boot from LAN during POST.
Description
Press Enter to exit saving changes.
Press Enter to exit discarding changes.
Press Enter to load setup defaults.
Computer Setup (F10) Utilities 9