Table of Contents
Advertisement
USER'S MANUAL
USER'S MANUAL
Equalizer
Mode
Equalizer
Audio for VGA Mode : Off
Reset
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
1. Press the MENU and
Sound menu.
2. Press the ENTER or
3. Press the
/
and ENTER button to select the
Equalizer menu.
4. Press the
/
button to select a particular item.
Press the ENTER button.
5. Press the
/ and ENTER button to adjust the
setting value and save .
6. Press the MENU button to exit.
If you make any changes to these settings, the
Sound Mode is automatically switched to "Custom".
Audio for VGA Mode
This funciton allowed you to choose audio input
which is used in VGA mode.If you choose Off,audio
will be played only when PIP function is enabled.And
audio input source will accord with the video input
source that is selected in PIP mode.If you choose
"Audio A"/"Audio B",no matter whether PIP function is
enabled or not and which video input is selected in PIP
mode,"Audio A"/"Audio B" is always being played.
Mode
Equalizer
Audio for VGA Mode :
Reset
1. Press the MENU and
Sound menu.
2. Press the ENTER or
3. Press the
/
and ENTER button to select the
Audio for VGA Mode menu.
SMT-1723-1923-Eng.indd 1:13
SMT-1723-1923-Eng.indd 1:13
Sound
: Custom
Move
Enter
Return
Equalizer
Move
Adjust
Return
/
button to select the
button.
Sound
: Custom
Off
Audio A
Audio B
Move
Enter
Return
/
button to select the
button.
4. Press the
/
and ENTER button to select the
setting you want.
5. Press the MENU button to exit.
This function is only available in VGA mode.
Reset
Selecting the Reset function after setting the equalizer
resets the equalizer setting to the factory defaults.
Mode
Equalizer
Audio for VGA Mode : Off
Reset
Move
1. Press the MENU and
Sound menu.
2. Press the ENTER or
3. Press the
/
and ENTER button to select the Reset.
4. Press the MENU button to exit.
You can select the "Reset" function only when the
sound "Mode" is set to "Custom".
Setup Menu
Language
Language
Blue Screen
Melody
PC
Energy Saving
PIP
System ID
No Signal OSD
Move
Language
Blue Screen
Melody
PC
Energy Saving
PIP
System ID
No Signal OSD
Move
1. Press the MENU and
Setup menu.
2. Press the ENTER or
3. Press the
/
and ENTER button to select the
Language menu.
4. Press the
/
and ENTER button to select the
setting you want.
5. Press the MENU button to exit.
- 13 -
Sound
: Custom
Enter
Return
/
button to select the
button.
Setup
: English
: Off
: Medium
: Off
: 1
: On
Enter
Return
Setup
:
English
:
中国语
:
Français
Deutsch
Español
:
Italiano
Português
:
Nederlands
:
Svenska
Enter
Return
/
button to select the
button.
2008-8-20 13:56:57
2008-8-20 13:56:57
Advertisement
Table of Contents
