Page 1
TFT-LCD MONITOR SMT-170N SMT-170P User Guide...
Page 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’...
Item 5. 6. Attachments : Do not use attachments not recommended by Samsung as they may cause hazards. 7. Water and Moisture : Do not use this monitor near water for example,...
Page 4
The monitor may fall, causing serious injury to a child or adult and serious damage to the appliance. Use only with a cart, stand, tripod. bracket or table recommended by Samsung, or sold with the monitor. Any mounting of the monitor should follow Samsung’s instructions and should use a mounting accessory recommended by Samsung.
Page 5
13. Lightning : For added protection for this monitor during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the monitor due to lightning and power-line surges. 14.
18. Replacement Parts : When replacement parts are required, be sure the service technician has used replacement parts specified by Samsung or have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards.
Page 7
Information to user Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Page 8
The party responsible for product compliance: SAMSUNG ELECTRONICS CO., LTD. America QA Lab of Samsung 3351 Michelson Drive, Suite #290, Irvine, CA92612 USA IC Compliance Notice This Class (A) digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Contents IMPORTANT SAFEGUARDS ......English-3 FCC & ICES Information ........English-6 Unpacking ............English-10 Names and Functions of Parts......English-11 Connecting to External Devices......English-13 Setup Menu Configuration........English-14 Attaching a Base ..........English-15 Appendix.............. English-16 English-9...
Unpacking Remove the package cover and place the product on a flat and secure surface or in the installation location. Check whether all the following devices and accessories are included with the main system. TFT-LCD Monitor User’s Guide Screw1 Screw2 Anchor (4pcs) (4pcs)
Names and Functions of Parts Front Panel A. Auto G. SOURCE Use this button to auto adjustment direct access. Each press of the SOURCE button will switch (VGA Mode Only) the input signal among the Video A, Video B, S-VIDEO and VGA. B.
Rear Panel A. 14V DC Connect the power cord for your monitor to the power port on the back of the monitor. B. S-VIDEO S-VIDEO input terminal. C. VGA VGA input terminal. D. VIDEO A (IN) / VIDEO B (IN) Video IN connectors for input signal from Cameras.
Setup Menu Configurations MENU Setting Range Explanation To adjust a specific Brightness within Brightness 0 ~ 100 the setting range. To adjust a specific Contrast within Contrast 0 ~ 100 the setting range. To adjust a specific Color (Video Mode) Color (Video Mode) within the setting range.
Attaching a Base Attaching a base NOTE: This monitor accepts a 75mm x 75mm VESA-compliant mounting interface pad. Squeeze the folded monitor stand into the VESA mounting bracket. Then fasten it using the four supplied nuts with the monitor, mounting pad and VESA mounting bracket aligned. 1.
Appendix Specifications 1. Model Name SMT-170N / SMT-170P 2. Video Composite Video : 2Ch Input 1.0Vp-p, 75 Ω terminated, Loop-through out S-VIDEO (Y/C) : 1Ch Input VGA : 1Ch Input 3. Audio 2Ch Audio In / Out (Loop-through) 4. Power Supply DC 14V, 3A 5.