Dvd Navigation - Western Digital WDBMCE0010HBK User Manual

DVD Navigation

In most cases, when the contents of an entire DVD have been successfully saved
and stored in the media center's internal drive or on an attached USB hard drive or a
networked hard drive connected to the media center, you will experience the same
DVD menu navigation functionality using the buttons on the media center remote as
you would using a DVD remote for a DVD player connected to a television.
Important: For DVD navigation to work, the VOB files must be placed in a
folder named VIDEO_TS.
Note: Video files such as AVI, MP4, MKV, and MT2S are "single track" video files that do not provide
DVD navigation features.
DVD Navigation Controls
Use these buttons on the remote control to control DVD navigation video playback:
Button
STOP
PAUSE/PLAY
1. Press FF (fast forward) or REV
(reverse) to scan video (press
repeatedly to select the scan speed)
2. Press PAUSE/PLAY to resume
playback on the selected position
NEXT
PREV
Up arrow
Down arrow
Function
Discontinues video playback
Pauses or resumes video playback
Scans the video playback forward or backward
The media center supports the following scan speeds:
2x, 4x, 8x, 16x
• Press during Fast Forward to skip forward 10
minutes.
NEXT
• Press to skip to the next chapter.
• Press during Fast Reverse to skip back 10 minutes.
PREV
• Press to skip to the previous chapter.
• At the main menu, move between selections such
as Play Movie, Scene Selection, Set Up, Special
Features, etc.
• Move subtitles up on the screen during video
playback.
• At the main menu, move between selections such
as Play Movie, Scene Selection, Set Up, Special
Features, etc.
• Move subtitles down on the screen during video
playback.
WD TV Live Hub Media Center
User Manual
WATCHING VIDEO – 47