Western Digital WDBMCE0010HBK User Manual page 166

3. Press / to select System, then press OK.
4. Press / to select Device Registration, then press OK.
5. On the Register Product screen, press
OK.
6. Use the navigation buttons
keyboard. Select Submit, then press OK.
7. Press / to select Last Name, then press OK.
8. Use the navigation buttons
keyboard. Select Submit, then press OK.
9. Press / to select Email, then press OK.
10. Use the navigation buttons
screen keyboard. Select Submit, then press OK.
11. On the Register Product screen, press
WD LED Light Control
Use this menu to turn off the WD LED light (Always Off). If turned off, the WD LED
will only appear during start up then disappear after the device has booted up. The
default setting is Normal.
Device Reset
Use this menu to perform device reset options:
Reset All Settings Back to Factory Default – restores all media center system
preferences and playback settings to their default factory values. This may correct
problems caused by a failed firmware upgrade or faulty configuration settings.
/ to select First Name, then press
to type in your first name using the on-screen
to type in your last name using the on-screen
to type in your email address using the on-
to select OK, and then press OK.
SETUP AND ADVANCED FEATURES – 162
WD TV Live Hub Media Center
User Manual