Western Digital WDBMCE0010HBK User Manual page 24

Home Theater (High-Definition)
To connect a home theater system using HDMI:
1. Plug an HDMI cable into the HDMI connector on the media center.
2. Plug the opposite end into the HDMI In port on your A/V receiver.
3. Plug an HDMI cable into the HDMI Out port on your A/V receiver.
4. Plug the opposite end into the HDMI port on your TV (if available).
5. Select the appropriate TV input source.
6. Set the appropriate audio output option on the media center. See "Audio Output"
on page 147.
To connect a home theater system using S/PDIF:
1. Plug a S/PDIF cable into the S/PDIF connector on the media center.
2. Plug the opposite end into the S/PDIF In port on your A/V receiver.
3. Plug HDMI, component, or composite connectors to the appropriate Out ports
on the media center.
4. Plug the opposite end(s) into the appropriate port(s) on your TV.
5. Select the appropriate TV input source.
6. Set the appropriate audio output option on the media center. See "Audio Output"
on page 147.
Note: HDMI, S/PDIF, component, and composite cables sold separately.
or
or
WD TV Live Hub Media Center
User Manual
GETTING STARTED – 20