Dell
Figure 14. R710 Mounted in B1 Sliding Rails
The CMA can be mounted to either side of the rails without the use of tools or the need for
conversion, but it is recommended that it be mounted on the side opposite the power supplies to
allow easier access to the power supplies for service or replacement. See Figure 15.
Figure 15. R710 Mounted in the B1 Sliding Rails with the CMA
The R710 static rails essentially function like a fixed shelf. The system is installed by resting the back
of the system on the inner ledges of the rail front brackets, then pushing the system forward while
ensuring that the shoulder nuts on the sides of the system are properly engaged in the horizontal
slots on the rails. See Figure 16.
PowerEdge R710 Technical Guide
51