Nic Indicators; Internal Chassis Views; Table 3. Power Supply Status - Dell External OEMR R710 Technical Manual

Dell
See the Power Indicator Codes section in the About Your System chapter of the PowerEdge R710
Hardware Owner's Manual on

4.6 NIC Indicators

See the NIC Indicator Codes section in the About Your System chapter of the PowerEdge R710
Hardware Owner's Manual on

4.7 Internal Chassis Views

Figure 6 shows the internal view of the PowerEdge R710 server.
PowerEdge R710 Technical Guide
Power Supply Status
Table 3.
LED Power Supply Status
AC Power is not present
AC Power is present
Fault of any kind is detected
DC Power is applied to the system
Redundant power supply mismatch
↔
(when hot-plugged/swapped)
Support.Dell.com
Support.Dell.com
for more information.
for more information.
17