Option
Embedded NIC1 and
NIC2
(Enabled default)
Embedded Gb NIC1
(Enabled with PXE
default)
MAC Address
Embedded Gb NIC2
(Enabled default)
MAC Address
OS Watchdog Timer
(Disabled default)
Embedded Video
Controller
(Standard default)
PCI IRQ Assignments Screen
Option
<PCIe device>
32
Using the System Setup Program and Boot Manager
Description
Enables or disables the operating system interface of the
NIC1 and NIC2 controllers. (The NICs may also be
accessed through the system's management controller).
PXE support allows the system to boot from the network.
Enabled with iSCSI Boot option is available if the NIC
on board supports iSCSI.
Displays the MAC address for the NIC.
PXE support allows the system to boot from the network.
Enabled with iSCSI Boot option is available if the NIC
on board supports iSCSI.
Displays the MAC address for the NIC.
Sets a timer to monitor the operating system for activity,
and aids in recovery if the system stops responding.
When Enabled, the operating system is allowed to
initialize the timer. When Disabled, the timer is
not initialized.
NOTE:
This feature is usable only with operating systems
that support WDAT implementations of the Advanced
Configuration and Power Interface (ACPI) 3.0b
specification.
Enables or disables BIOS support for the integrated
video controller.
NOTE:
This field can be disabled only if an add-in video
card is present. If this field is disabled, remote access
features such as virtual KVM are not available.
Description
Use the <+> and <-> keys to manually select an IRQ
for a given device, or select Default to allow the BIOS to
select an IRQ value at system startup.