Pci Irq Assignments Screen - Dell DR4000 Owner's Manual

Option
Embedded Gb NICx
(NIC1 default: Enabled
with PXE;
Other NICs: Enabled)
MAC Address
OS Watchdog Timer
(Disabled default)
I/OAT DMA Engine
(Disabled default)
Embedded Video
Controller
(Enabled default)

PCI IRQ Assignments Screen

Option
Embedded X-treme PCI
Adapter
46
Using the System Setup Program and UEFI Boot Manager
Description
Enables or disables the embedded NICs. Options are
Enabled, Enabled with PXE, and Enabled with iSCSI
Boot. PXE support allows the system to boot from the
network.
Displays the MAC address for the NIC.
Sets a timer to monitor the operating system for activity,
and aids in recovery if the system stops responding.
When Enabled, the operating system is allowed
to initialize the timer. When Disabled, the timer is
not initialized.
NOTE:
This feature is usable only with operating systems
that support WDAT implementations of the Advanced
Configuration and Power Interface (ACPI) 3.0b specification.
Enables or disables the I/O acceleration technology
(I/OAT). This feature should only be enabled if the
hardware and software support I/OAT.
Displays the total amount of video memory available in
the embedded video controller.
Description
Use the <+> and <-> keys to manually select an IRQ
for a given device, or select Default to allow the BIOS to
select an IRQ value at system startup.