Sony MEX-BT3000 Operating Instructions Manual page 22

CLOCK-ADJ (Clock Adjust) (page 6)
CT (Clock Time)
Activates the CT function: "ON," "OFF"
(page 11).
BEEP
Activates the beep sound: "ON," "OFF."
CAUT ALM (Caution Alarm)*
Activates the caution alarm: "ON,"
"OFF" (page 6).
AUX-A (AUX Audio)*
Activates the AUX source display: "ON,"
"OFF" (page 23).
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: "NO,"
"30S (Seconds)," "30M (Minutes)," "60M
(Minutes)."
REAR/SUB*
1
Switches the audio output: "REAR-
OUT" (power amplifier), "SUB-OUT"
(subwoofer).
DEMO (Demonstration)
Activates the demonstration: "ON,"
"OFF."
DIMMER
Changes the display brightness: "ON,"
"OFF."
AUTO SCR (Auto Scroll)
Scrolls long items automatically: "ON,"
"OFF."
REGIONAL*
Restricts reception to a specific region:
"ON," "OFF" (page 10).
LPF (Low Pass Filter)*
Selects the subwoofer cut-off frequency:
"OFF," "80Hz," "100Hz," "120Hz,"
"140Hz," "160Hz."
SW PHASE (Subwoofer Phase)*
Selects the subwoofer phase: "SUB
NORM," "SUB REV."
22
1
1
2
3
3
HPF (High Pass Filter)
Selects the front/rear speaker cut-off
frequency: "OFF," "80Hz," "100Hz,"
"120Hz," "140Hz," "160Hz."
LOUDNESS
Reinforces bass and treble for clear
sound at low volume levels: "ON,"
"OFF."
BTM (Best Tuning Memory) (page 9)
BT INIT (Bluetooth Initialize)*
BT SIGNL (Bluetooth Signal)
Turns the Bluetooth signal on/off.
PAIRING
Turns the pairing mode on/off.
Memorizes the information between this
unit and the Bluetooth device.
*1 When the unit is turned off.
*2 When FM is received.
*3 When the audio output is set to "SUB-OUT."
(page 19)
1