Sony MEX-100NV Operation Manual page 86

7890_GB.book Seite 84 Montag, 1. Juli 2002 1:20 13
Navigation operation
Entering the destination
The last location entered is displayed.
If you want to enter a destination in the displayed location,
you can select or
If your destination lies in another location, select the location
using the SELECT control and press to confirm.
Select the letters one after the other by turning the SELECT
control and press to confirm. The enlarged selected letter ap-
pears at the right of the display.
Using the multifunction button
ter is deleted.
The complete entry is deleted if the multifunction button
is pressed for more than 2 seconds.
84
Letters which are already entered are displayed inversely. For
the purpose of support, the existing entry is displayed at the
next place-name to be reached. The unit offers only the pos-
immediately. sible remaining letters for selection. If no other entries are
available, the unit completes the place-name automatically.
To accept the entry, press and hold the SELECT control for
more than 2 seconds or select the small tick
H
press the SELECT control.
If the complete place-name was previously entered or was au-
tomatically completed, the program switches to either place-
distinguishing list or to road or centre entry.
If no roads and only the centre can be selected in the location
entered, the program switches directly to route menu.
the last confirmed let-
If an incomplete location entry was confirmed, the place se-
lection list is displayed.
M
and briefly