Quick Reference; Attaching The Stand; Removing The Stand - Sharp Aquos LC-60LE600U Operation Manual

QUICK REFERENCE

Attaching the Stand

• Before attaching the stand, make sure to turn off the TV
and unplug the AC cord.
• Before performing work spread cushioning over the base
area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Do not remove the stand from the TV unless using an
optional wall mount bracket to mount it.
• Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
• After attaching the stand to the TV, do not hold the
stand when you put up, set up, move or lay down the
TV.
1 Confi rm that there are 12 screws (8 long screws
and 4 short screws) supplied with the stand unit.
2
1 Set the post for the stand unit onto the
polystyrene foam.
2 Attach the base to the post.
3 Insert and tighten the 8 screws into the 8 holes
on the bottom of the base.
• Hold the stand unit securely with one hand, and then
tighten the screws.
2
1
3
1 Insert the stand into the openings on the bottom
of the TV.
• Make sure that the stand is fi rmly inserted into the
TV. Improper installation may result in tilting of the
TV set.
2 Insert and tighten the 4 screws into the 4 holes
on the rear of the TV.
2
Short screws
3
1
FRONT
Soft cushion
2
1
1

Removing the Stand

• Before detaching the stand, make sure to turn off the TV
and unplug the AC cord.
CAUTION
• Do not remove the stand from the TV unless using an
optional wall mount bracket to mount it.
1 Unfasten the four screws used to secure the stand
in place.
2 Detach the stand from the TV.
Long
screws
• In the installation procedure, be careful not to catch your
fi ngers between the TV set and the fl oor.
7