Sharp XE-A207 User Manual page 30

(4) TAX & AMOUNT
You can set taxes with the tax table.
When you select "%TAX" as a tax calculation type, you can input only the value of the highest row of the table
(the tax exemption limit).
When you select "TABLE TAX," refer to the next subsection "To set taxes with the tax table."
(5) Table tax adjustment
After inputting taxes and amounts in the table above, click this button to check whether the table is set
appropriately. Duplicate cycle data is removed. An error message appears in cases below:
• TYPE is not "TABLE TAX"
• RATE is "0"
• Figures are not arranged in an ascending order
• The quantity of Amount data values is not sufficient
(6) CYCLE
The cycle is calculated when you click "Table tax adjustment." You can also input the value manually. The
default value is "0.00." Also refer to "Tax Programming" on page 81 in the Instruction Manual of XE-A207 and
XE-A23S.
(7) TAX NO.
The selected tax number is displayed. You can also change the tax number selection with the [<] button or [>]
button.
(8) Get from SD
Click this button to read the tax data from an SD memory card.
(9) Send to SD
Click this button to write the tax data to an SD memory card.
27