Sharp Aquos AN-ACS1U Operation Manual page 27

AQUOS LINK Setup
Point towards
AQUOS TV
Open the
flip cover
AQUOS TV remote control (example)
• Use the remote control of the AQUOS TV and point it
towards the AQUOS TV for operation.
Reproducing the sound of the AQUOS TV
through the AQUOS AUDIO system
You can opt to listen to the TV sound only from the AQUOS
AUDIO system.
1
Press TV POWER.
2
Open the remote control's fl ip cover.
3
Press OPTION.
• The AQUOS LINK Menu screen appears.
AQUOS LINK
Recorder EPG
Top menu/title list
Media change
By AQUOS AUDIO SP
By AQUOS SP
Sound mode change
Model select
4
Press a /b to select "By AQUOS AUDIO SP",
and then press ENTER.
• The sound from the TV speaker and headphone
terminal is silenced and only the sound from the this
AQUOS AUDIO system is audible.
5
Press OPTION.
• The AQUOS LINK Menu screen disappears.
• If you press the button while the menu screen is off,
the menu screen will appear. In such a case, press the
button once more to turn the menu screen off.
Returning the setting to AQUOS TV sound
reproduction
You can opt to listen to the TV sound only from the AQUOS
TV.
1
Open the remote control's fl ip cover.
2
Press OPTION.
• The AQUOS LINK Menu displays.
3
Press a /b to select "By AQUOS SP", and then
press ENTER.
• The AQUOS AUDIO system goes into mute mode.
NOTE
• The AQUOS TV remote control is not supplied with this product.
• The AQUOS TV remote control may be different depending on the
model.
AQUOS LINK
25