Changing The Resolution - Sharp MX-M503U Quick Start Manual

CHANGING THE RESOLUTION

The resolution can be selected to match the characteristics of the original, such as text or photo, the size of the
text, and the darkness of the image.
The following example explains how to set the resolution to [Fine] and [Half Tone] when sending an original with
small text.
The side to be scanned must be face up!
Fax
Auto
Mode Switch
Exposure
Image
Settings
Standard
(1) Resolution
Memory TX
(2)
Direct TX
Auto A4
Original
Auto Reception
Fax Memory:100%
Fax
Resolution
Standard
Fine
(3)
Super Fine
Ultra Fine
58
Address Book
Sub Address
Special Modes
File
Special Modes
Quick File
OK
(5)
Half Tone
(4)
1
Place the originals.
When using the document glass, place the
original with the side to be scanned face down.
2
Select the resolution in the touch panel.
(1) Touch the [Image Settings] key.
(2) Touch the [Resolution] key.
(3) Touch the [Fine] key.
The resolution increases in the following
order: [Standard], [Fine], [Super Fine],
[Ultra Fine].
(4) Touch the [Half Tone] key.
Select [Half Tone] for a photo or illustration
with shading to further improve the image.
[Half Tone] cannot be selected when
[Standard] is selected.
(5) Touch the [OK] key.
3
Enter the fax number of the receiving
fax machine and press the [START]
key.
Correct a mistake Cancel scanning