Caring for water/dust/shock-proof capability
Cleaning after using the product under/near water
After using the product in water, rinse to remove foreign substances or salt from the product within 1 hour.
1
Immerse the product in clean water for 2~3 minutes, and then
gently shake it in the water to rinse it.
•
Hold the product with the cleaned part facing down, and then gently
shake the product.
2
Remove the product from the water, and then wipe the water
droplets off the product with a soft and dry cloth.
3
Dry the product completely in a well ventilated and shaded area.
•
Bubbles may appear when the product is soaking in water. This is not a
malfunction.
•
If the product is not rinsed completely, the water-proof performance may
deteriorate.
•
Press each button of the product to remove salt or other foreign
substances between/around the buttons.
•
Do not use chemicals to clean the product including soap, neutral
detergent or alcohol. You can damage the product's water-proof
capability.
•
This product is designed to drain well. The water drains through the
small holes around the buttons on the product.
•
Do not use a device such as a hair dryer to dry the product. The water-
proof performance may deteriorate or the appearance of the product
can be transformed.
•
Do not open the memory card/HDMI jack cover and the USB plug cover
until the product has dried out.
•
If there is water on this product, wipe it off with a soft and dry cloth until
it is completely dry.
•
After using the product under/near water, dry the internal microphone
and speaker of the product completely. Not doing so may decrease the
audio quality during video recording or playback.
•
Do not poke the speaker or microphone of the product with any sharp
object. Water-proof performance will be degraded.
v