Table of Contents
Advertisement
Another option is course-up mode, which keeps the map at the same
orientation as the initial bearing to the waypoint. When either the
track-up or course-up mode is on, an "N" shows on the map screen to
help you see which direction is north.
To change map orientation: from the Map Page, press
|
O
ENT
RIENTATION
Press
|
EXIT
EXIT
Map Menu, left; Map Orientation menu with
the North Up map orientation option selected, right.
Navionics
Your IntelliMap 320 can display Navionics
They work just like a MapCreate custom map on an MMC.
Left, entrance to Chesapeake Bay in a MapCreate 6 custom map, 10
mile zoom. Center, same position on Navionics chart at 11.15 mile zoom
To display a Navionics chart:
1. Install the Navionics MMC in the memory card compartment and
turn on the unit. (For full card install instructions, see Sec. 2.)
WARNING:
You should never format the MMC containing your
Navionics chart. Formatting the MMC will permanently
erase the chart from the card.
. Use ↑ or ↓ to select the desired mode, then press
to return to the page display.
Charts
and right, 5.56 mile zoom.
electronic charts on MMCs.
79
|↓ to
MENU
M
AP
ENT
.
Advertisement
Table of Contents
