Find Addresses - Eagle 500C Installation And Operation Instructions Manual

In search results, the distance and bearing to the selected item will be
calculated from the current position. In the case of a cursor search, the
search results show distance and bearing from the cursor, but an indi-
vidual waypoint's information screen shows distance and bearing from
Address search result list, left. At center, Map Page showing location
of the address on the map, highlighted by cursor. At right, after the
address is located, you can navigate to it ("D" symbol for destination).

Find Addresses

1. From the Map Page, press |↓ to | .
MENU F A ENT
IND DDRESS
2. Press to search in the Address field.
ENT
3. To enter an address number, press ↑ or ↓ to change the first number,
then press → to move the cursor to the next number and repeat until
the number is correct, then press .
ENT
Find Address Menu.
4. To enter a street name, press ↓ to
| . There are two options:
S ENT
TREET
A. You can spell out the name in the top selection box. Press ↑ or ↓ to
change the first letter, then press → to move the cursor to the next let-
ter and repeat until the name is correct, then press | . B. Jump
ENT ENT
, then press ↓ or ↑ to
down to the lower selection list by pressing
ENT
select a street name from the list, then press . The street name you
ENT
selected is now in the street field.
170